How to fix battery drain
The 3D view and the camera use the most power, and only while they’re open. On an iPad with a paired sensor, the app also listens for the sensor the whole time it’s open.
On each platform
Section titled “On each platform”| When it drains | What to do |
|---|---|
| While a storage is open in 3D | Leave the 3D view. It stops as soon as you do |
| While the camera is open | Close the scanner, and turn the torch off |
| Any time the app is open, on an iPad with a sensor | See A paired sensor on iPad below |
| Settings lists InVintory under Location | Nothing. The app takes single readings while you use it, not a continuous trail |
In the background, the app only receives notifications. Widgets are refreshed by iOS. Remove the ones you don’t use.
| When it drains | What to do |
|---|---|
| While a storage is open in 3D | Leave the 3D view |
| While the camera is open | Close the scanner, and turn the torch off |
Android has no sensor pairing and uses no Bluetooth.
The web app only runs while its tab is open. Close the tab when you’ve finished.
A paired sensor on iPad
Section titled “A paired sensor on iPad”The iPad is the device that collects your sensor’s readings. While InVintory is open on it, on any screen, the app listens for the sensor over Bluetooth and sends us the readings. That’s a steady cost, and the usual answer when an iPad’s battery falls while you’re just browsing.
An iPhone doesn’t listen for the sensor. It shows the readings the iPad sent, and only uses Bluetooth while you pair a sensor.
To stop it, close InVintory on the iPad, unpair the sensor, or turn off Bluetooth for InVintory in the iPad’s Settings. No new readings are collected while it’s off.
Good to know
Section titled “Good to know”- Scanning a label is quick. The camera works while it’s open. Reading the label happens after you take the photo.
- Battery dropped overnight? The iPhone and iPad app does nothing while closed, except receive notifications.

